|
The HART Accurizing Package
There are several procedures that will improve the accuracy of your ‘off the shelf’ factory rifle. We have combined these into the Accurizing Package! It includes the following:
1. Lap the Bolt Lugs - This will allow the lug surfaces to be in total contact with the receiver surface thus preventing crooked case heads which will deter from your accuracy.
2. Lap the Barrel - This will remove any burrs or imperfections to give you consistant velocities and less fouling of the barrel.
3. Touch up the Crown - This is the most overlooked item in creating accuracy. The Bullet must exit the barrel evenly to eliminate flyers. We use the same set-op as we use on our match rifles.
4. Adjust Trigger Pull - On rifles that have adjustable triggers (i.e. remington) we set them at a crisp 3.5lb pull. On non-adjustable triggers we try to achieve a reasonable crisp pull.
5. Skim Bed Action and 2” of Barrel - This process will ‘marry the action to the stock’ thus eliminating any uneven pressure or stress points. This allows the barrel to be what is termed ‘free floating’.
6. Install Rings, Lap Rings, Install Scope and Boresight - This will relieve any stress on the scope tube.
$236.25
(Normal turn around time is approximately 2-3 weeks but high demand times may run longer. We set no completion dates on any work preformed.)
|
